ইঞ্জিনিয়ারিং মেটেরিয়ালস MCQ
341. Initial setting time of ordinary Portland cement is-
15min
30min
60min
10hour
342. The burning of bricks in kilns is completed within-----hours.
12
24
48
96
343. Pozzolana is essentially a silicious material containing clay upto-
20%
40%
60%
80%
344. The strength of concrete using air entraining cement gets reduced by-
5 to 10%
10 to 15%
15 to 20%
20 to 25%
345. The average out-turn of first class bricks in clamp burning is about-
50%
60%
70%
80%
346. The percentage of alumina in a good brick clay should vary from-
20 to 30%
30 to 40%
40 to 50%
50 to 60%
347. The frog of a brick is normally made on its-
longer face
bottom face
shorter face
top face
ব্যাখ্যা: ব্যাখ্যা: ইটের যে-কোনো একপাশে খোদাইকৃত বা কোম্পানির নাম সংবলিত অংশকে ফ্রগ বলে।
348. দুটি বালির নমুনার ওজন ও FM যথাক্রমে 500 গ্রাম ও 750 গ্রাম এবং 2.5 ও 2.2 হলে তাদের Combined FM কত হবে? [BPSC-20]
2.4
2.38
2.42
2.32
ব্যাখ্যা:
ব্যাখ্যা: Combined, FM=(F1m1+F2m2)/(m1+m2)
=(500*2.5+750*2.2)/(500+700)
=2.32
349. The compressive strength of perforated bricks should not be less than-
4 MN/m²
5 MN/m²
6 MN/m²
7 MN/m²
350. The average out-turn of first class bricks in kiln burning is-
50 to 60%
60 to 70%
70 to 80%
80 to 90%
351. উন্নত মানের বালু কখনোই ----থেকে আহরিত হয় না। [PPA-20]
নদী
নালা
সাগর
চর
ব্যাখ্যা: ব্যাখ্যা: বালু সাধারণত গর্ত, নদী ও সাগর হতে সংগ্রহ করা হয়ে থাকে। তবে নালা হতে কখনোই সংগ্রহ করা হয় না, কারণ নালার বালিতে প্রচুর পরিমাণ ময়লা থাকে এবং পলি জমা থাকে।
352. The inert mineral material used for 01-themanufacture of mortars and concrete is-
cement
aggregate
water
admixture
353. The percentage of water for making a cement paste of normal consistency varies from-
15 to 25%
25 to 35%
35 to 50%
50 to 60%
354. The degree of grinding of cement is called-
fineness
impact value
soundness
bulking
355. ১ম শ্রেণির ইট ২৪ ঘণ্টা পানিতে ডুবিয়ে রাখলে শোষিত পানির পরিমাণ ইটের শুকনো ওজনের শতকরা কত ভাগের অধিক হবে না? [BPSC-20]
10%
15%
20%
25%
ব্যাখ্যা: ব্যাখ্যা: ১ম শ্রেণির ইট ২৪ ঘণ্টা পানিতে ডুবিয়ে রাখলে তার নিজের ওজনে ১/৬
অংশ বা ২০% এর বেশি পানি শোষণ করতে পারবে না।
356. The natural drying of bricks is also called back drying.
true
false
357. The size of mould for bricks should be---- the specified size of the bricks.
equal to
double
smaller than
larger than
358. ASTM No. 16 সিভের ওপেনিং সাইজ কত মিমি? [BWDB-20]
১.১৮ মিমি
১.৪০ মিমি
২.৩৬ মিমি
১.৭০ মিমি
কোনোটিই নয়
ব্যাখ্যা: ব্যাখ্যা: ASTM No.-4 size seive-এর Opening 4(4.75mm), No. 6(3.35), 8(2.36mm), 10(2.00mun), No.
12(1.70mm), 16(1.18mm)/
359. For reinforced concrete, the aggregate used is-
sand
grave
crushed rock
all of these
360. For the construction of retaining walls, a------stone must be used.
soft
hard
heavy
light