When DC Motor routes on the action of driving torque, the conductors move through the magnetic field and hence emf induce the direction of this emf oppose to applied voltage. This is called as back emf.
884. কোন ধরনের Motor-এর no-load speed সর্বোচ্চ হয়?
ব্যাখ্যা : At no-load a DC series motor rotates at dangerously high speed. A DC series motor should always be started on load. When the motor is connected across the supply mains without load, it draws small current from the supply mains.
886. Increase of load, the motion of DC shunt motor will-
As increased load means that it requires more torque to turn at that speed. The motor is not producing that torque. So motor will slow or decrease a little bit.
ব্যাখ্যাঃ Star delta starter is mainly used to reduce the flow of current at the starting of the three phase induction motor to avoid sparking, overheating, coil burning etc.
The effect of a armature reaction is to-
- Reduction of generated emf due to decrease in value of flux per pole.
-The maximum value of gap flux density increases.
-The armature reaction shifts brush axis from GNA
894. A steel mill requires a motor having high-speed control. Which one of the following motors will you choose?
Slip ring induction motor is a type of motor where its external circuit is connected using some rings. This rings attached with high resistance acts as an external circuit for the rotor. This external circuit helps in developing a high starting torque with low current
896. The DC series motor should never be switched on at no load because-
When the DC motor is connected across the supply without load then it will draw a small amount of current form supply. As low current will flow through the field winding as well as armature widing so main flux produced will be lesser. As, main flux is lower. speed will tend to increase. As speed increases back em also increases and thus current drawn from the supply will become more and more lower and thus main flux will also become more and more lower and thus speed will tend to increase more and more.