Image

Exams

Prepare for your next test with our collection of exam-based practice sets and question banks designed for effective assessment and revision.

Courses

Discover our wide range of online courses designed to help you learn new skills, master complex topics, and achieve your academic or career goals.

Board Questions

Access past board exam questions organized by year and subject to help you understand patterns, improve preparation, and boost your exam performance.

MCQ
241. Pilot tube দ্বারা কী পরিমাপ করা হয়?
Explained: Pilot tube দ্বারা তরলের প্রবাহ বেগ পরিমাপ করা হয়। অষ্টাদশ শতাব্দীতে ফরাসি ইঞ্জিনিয়ার হেনরি পিটট এপি আবিষ্কার করেন। উত্তর সহ কয়েকটি অনুরূপ গুরুত্বপূর্ণ প্রশ্ন 1. Pitot tube দ্বারা কী পরিমাপ করা হয় গতিবেগ। 2.In a pitot tube, the kinetic energy is converted into-pressure energy 3.The lower end of the pitot tube is bet at an angle of-90 4. The most common device used for measuring air speed ispitot tube 5. Pitot tube দিয়ে কী মাপা হয়?-Static pressure (PSC mলাদেশ ২০১০-4040
চাপ
গতিবেগ
প্রবাহ
তাপমাত্রা
242. When cohesion less soil attains quick condition, it looses--
Neither ক. and খ. Explained Cohesionless solids are defined as any free running type of soil such as sand, Gravel and stone. Cohesionless soil attains quick condition then it lose it's shear strengh and bearing capacity. উত্তর সহ কয়েকটি গুরুত্বপূর্ণ প্রশ্ন 1. When a cohesionless soil attains quick condition, it losses Shear strength, Bearing Capacity. 2. যে Hydraulic gradient এ কার্যকরী চাপের পরিমাণ শূন্য হয় তাকে কী বলে Critical Hydraulic Gradient. 3. Critical hydraulic gradient এ বালিকে কী বলে- Quick condition of sand. 4. যে পথে পানি প্রবাহিত হয় তার ঢালকে কী বলে- Hydraulic gradient. 5. Cohesionless soil বলতে বুঝায়- Sand, (PSC বাংলাদেশ কোস্ট গার্ড ২০-১০-২০২০), (শি. এ. অ.উ. স. এ. (এস্টিমেটর) ০৩-০২-২০২২)
Shear strength
Bearing capacity
Both ক. and খ.
Neither ক. and খ.
243. একটি পাত্রে Im পানির উপর 50cm তেলের (sq. gravity-0.8) জ্বর আছে। পাত্রের তলদেশে চাপ কত?
4 kN/m²
12 kN/m²
10 kN/m²
14 kN/m²
244. Reynold's Number কত হলে flow turbulent হয়?
উত্তর সহ কয়েকটি অনুরণ গুরুত্বপূর্ণ প্রশ্ন Reynold's Number কত হলে flow turbulent >4000 The flow in a pipe is neither laminar nor turbulent when Reynold number is - Between 2000 and 2800 A large Reynold number is indication of - Highly turbulent flow
<2000
2000-4000
>4000
<4000
245. একক ক্ষেত্রে উপর প্রযুক্ত বলকে বলে-
Explained:- কোনো বস্তুর প্রতি একক ক্ষেত্রফলের উপর লম্বভাবে প্রযুক্ত বলকে বাপ (Pressure) বলে। উত্তর সহ কয়েকটি গুরুত্বপূর্ণ প্রশ্ন 1. একক ক্ষেত্রের উপর প্রযুক্ত বলকে বলে pressure. 2. Pressure এর একক কোনটি N/m^2. 3. 1 N/m^2=1 Pascal. 4. Atmospheric pressure =101325 Pa. 5. 1 Mpa= 1 N/mm^2.
pressure
surface tension
strain
কোনোটিই নয়
246. The ratio of inertia forces to gravity forces is called - ইিনার্শিয়া ফোর্স ও গ্র্যাভিটি ফোর্সের অনুপাতকে বলে--
উত্তর সহ কয়েকটি অনুরূপ গুরুত্বপূর্ণ প্রশ্ন 5. Inertia force এবং surface tension এর অনুপাতকে কী বলে weber's number. 6. Inertia forces এবং viscosity forces এর অনুপাতকে কী বলে Reynold's Number. 7. Reynold's number 2000 এর কম হলে প্রবাহটি কেমন। - Laminar. 8. Reynold's number 4000 এর বেশি হলে প্রবাহটি কেমন Turbulent.
Cravity number
Reyonolds number
Weber number
Froude number
247. Stoke's law is used to determine the (স্টোকস আইন নির্ধারণ করতে ব্যবহৃত হয়)?
Explained:- টার্মিনাল বেগ, গোলক এবং তরলের আকার এবং খনাত্ব নির্ধারণ করতে স্টোকের সূত্র ব্যবহার করা হয়। স্টোকের সূত্রটি তরলের সান্দ্রতা গণনা করতে ও ব্যবহার করা যেতে পারে।
Specific gravity of soil solids
density of soil suspension
grain size distribution of those soils whose grain size is finer than 0.07
all of the above
248. If all the variables of a steam are independent of time, t is said to be in-
উত্তর সহ কয়েকটি অনুরণ শুরুত্বপূর্ণ প্রশ্ন 1. Steady flow occurs when-The valsity of moonssive fluid particles, at any point, ix the same at messive perreds of time 2. A flow is called super-sonic if the Mach monter is between 1 and 6 da.
Constant flow
Closed flow
Steady flow
Unsteady flow
249. Pipe এর Headloss এর কারণ কী?
Eplained: pipe- Head loss- এর কারণগুলো হলো- (ক) রমণজনিত ঘর্ষণ (খ) বেল্ড এ এালবোর কারণে (গ) বাধার কারণে উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন 1. Pipe এর Headloss এর কারণ কী প্রবাহজনিত ঘর্ষণ, হঠাৎ সংকোচন, প্রসারণ। 2. ঘনি জনিত beadloss কি বলে - Major headloss. ৪. যর্ষণ প্রদে হেডলসতে কি বলে - Minor headoss. 4. ঘর্ষণ জনিত বাঁধাকে কি বলে fluid friction. 5. Fluid friction যার উপর নির্ভর করে ভেজা পৃষ্ঠের ক্ষেত্রফল, fluid density, পৃষ্ঠের অমসৃণতা
প্রবাহজনিত ঘষণ
হঠাৎ প্রসারণ
হঠাৎ সংকোচন
সবগুলো
250. কোন ক্ষেত্রে হাইড্রলিক জাম্প সম্ভব নয়?) In which case is the hydraulic jump not possible?
উত্তর সহ কয়েকটি অনুরণ শুরুত্বপূর্ণ প্রশ্ন 1. To hold hydraulic jumps, baffle walls are provided In English type falls 2.Hydraulic gradient এ কার্যকরী চাপের পরিমাণ শূন্য হয় তাকে কী বলে Critical Hydraulic Gradient. 3. Critical hydraulic gradient এ বালিকে কী বলে- Quick condition of sand. 4. A hydraulic jump is generally formed when a stream moving with A hyper-critical velocity meets a stream moving with a sub-critical velocity
Irutial speed > Critical speed
Initial speed Critical speed
Initial speed=Critical speed
Independent
251. The force per unit length is the nit of-
Explained Surface tension can be thought of the energy input needed to create new surface area. A surface tension only acts at the nterface we can consider it a force per unu length.
surface tension
viscosity
Capillarity
compressibility
252. Groundwater প্রবাহ নির্ণয়ের formula কোনটি?
Explained:- Darcy's এর formula টি হলো Q=kiA এখানে। উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন 1. Ground water প্রবাহ নির্ণয়ের formula কোনটি-Darcy's Law, q=KIA. 2. Laminar প্রবাহের ক্ষেত্রে প্রবাহের হার hydraulic gradient এর সমানুপাতিক। 3. ভেদাতা সহগের একক কোনটি cm/sec. 4. Critical hydraulic gradient এর কার্যকরী চাপের মান কত- zero. 5. যে পথে পানি প্রবাহিত হয় তার ঢালকে কী বলে ঔদক ঢাল।
kuichling
Chezy
Darcy's
Hazen's
253. Center of buoyancy always [প্লবতার কেন্দ্র সর্বদা]-
উত্তর সহ কয়েকটি অনুরণ শুরুত্বপূর্ণ প্রশ্ন 1.Center of buoyancy is the Centroid of the Jusplaced volume of fluid 2. Metacentric height is the distance between the metacentre and-Center of gravity 3. The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as Center of pressure 4. According to the principle of buoyancy a body totally or partially immersed in a fluid will be lifted up by a force equal to - Weight of the fluid displaced by the body 4. The two important forces for a floating body are - Excyancy, gravity
Coincides with the center of gravity
Coincides with centroid of the volume of fluid displaced
Remain above the center of gravity
Remain below the center of gravity.
254. Hydrometer reading এ কী correction করা হয়?
Explained Hydrometer reading- Temperature, Meniscus, Dispersing agent, calibration, adjusted value ইত্যাটি correction করা হয়। উত্তর সহ কয়েকটি অনুরণ শুরুত্বপূর্ণ প্রশ্ন 1. Hydrometer reading এ কী correction করা হয় Temperature, Meniscus. Dispersing agent. 2. তরলের আপেক্ষিক গুরুত্ব মাপার জন্য কোনটি ব্যবহার করা হয় হাইড্রোমিটার। 3. হাইড্রোমিটার সব সময় কত তাপমাত্রায় ক্যালিব্রেশন করা থাকে 27°C. 4. Hydrometer analysis এ মাটিকে পানির সাথে। মিশাতে কী ক্যামিক্যাল ব্যবহার করা হয় সোডিয়াম হেক্সামেথ্য ফসমেট।
Temperature
Meniscus
Dispersing agent
উপরোক্ত সব
255. Which equipment is used to determine the flow velocity of point in a flowing liquid throgh channel? [ কোন চ্যানেলে মধ্যে দিয়ে প্রবাহমান তরলে কোন বিন্দুর প্রবাহ বেগ নির্ণয়ের জন্য কোন যন্ত্র ব্যবহৃত হয়?
উত্তর সহ কয়েকটি অনুরণ গুরুত্বপূর্ণ প্রশ্ন The average mean velocity of a stream having depth h, may be obtained by taking the average of the readings of a current meter at a depth of -0.2 hmi 0.8h 2. If the velocities of flow of a stream of 10 m depth recorded by a current meter at depths of 2 m and 8 m are 0.7 m and 0.3 m respectively, the discharge per unit width of the stream in cubic metres, is-5 3. A current meter measures the velocity of flow, if it is held-At any point within the cross-section 4. The velocity through a channel of circular section will be maximum when the depth of water is the diameter of the circular channel. - 0.81 times 5 Normal depth in open channel flow is the depth of flow corresponding to Uniform flow
voltmeter
manometer
current meter
all of the above
256. The ratio of inertia force to gravity force is called - [ইনার্শিয়া ফোর্স ও গ্রাভিটি ফোর্সের অনুপাতকে বলে-
উত্তর সহ কয়েকটি অনুরণ শুরুত্বপূর্ণ প্রশ্ন 1. The ratio of the inertia force to the called Euler's number - Fressure forpe is 2. Select the correct statement-Weber's number is the ratio of inertia force to surface tension force 3 Reynold's number is the ratio of inertia force to - Viscous force Horizontal acceleration due to earthquake results in-Hydrodynamic pressure, Inertia force into the body of the Lam 5 Density of water is maximum at -40
Gravity number
Reynolds number
Veber number
Froude number.
257. দুই বিন্দুর পিজোমেট্রিক লেভেলের পার্থক্যকে কী বলে?
পজিশন হেড
হাইড্রোলিক হেড
ক ও খ উভয়ই
কোনটিই নয়।
258. Flow of watet in the river depends- [নদীতে পানির প্রবাহ নির্ভর করে] -
on depth of waterr
on hydraulic gradient
on width of river
on quantity of water
259. A fluid which obeys the Newton's law of viscosity is termed as-
Explained: A fluid which obeys Newton's law of viscosity is termed as Newtonian fluid. Newtonian fluids obey Newton's law of viscosity. The viscosity is independent of the shear rate. But Non-Newtonian fluids do not follow Newton's law of viscosity. উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন 2. A fluid which obeys the Newton's law of viscosity is termed as Newtonian fluid 2. The unit of viscosity is kg-sec/metre 3. Dynamic viscosity of most of the gases with rise in temperature-Increases 4. In order that flow takes place between two points in a pipeline, the differential pressure between these points must be more than - Frictional force Viscosity, Surface friction
real fluid
ideal fluid
Newtonian fluid
non-Newtonian fluid
260. Poise কিসের একক?
Explained: One poise is equal to 0.2 N-S/m² উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন 1. Poise কীসের একক - Viscosity. 2. 1 Pa-s is 10- poise. 3. Poise কোন একক -CGS. 1 Poise 1 dyne -s/cm^2. 1 poise 0.10N sec/m² 10^4 KN_sec/m²
Surface tension
Viscosity
Pressure
Shear stress