ইলেকট্রিক্যাল মেজারমেন্ট ইন্ড মেজেরিং ইন্সট্রুমেন্ট MCQ
1. The EMF of Weston standard cell is measured using-
2. A direct current can be measured by-
AD.C. potentiometer directly
A D.C. potentiometer in conjunction with a standard resistance
A D.C. potentiometer in conjunction with a volt ratio box
3. The spring material used in a spring control device should have the following property---
Most be of low temperature coefficient
Should have low specific resistance
4. The multiplier and the meter coil in a voltmeter are in-
5. The chemical effect of current is used in---
6. To measure the flux, devices used are based on-
7. The resistance can be measured most accurately by-
8. A moving iron ammeter may be compensated for frequency errors by-
9. Most sensitive galvanometer is-
Spot ballistic galvanometer
10. An ohmmeter is an instrument for measuring-
11. Resistances can be measured with the help of-
Ohmmeters and resistance bridges
12. একটি কোষের তড়িচ্চালক শক্তি 1.5V এবং অভ্যন্তরীণ রোধ 2Ω। এর প্রান্তদ্বয় 10Ω রোধের সাথে যুক্ত থাকলে কতটুকু তড়িৎ প্রবাহিত হবে?
13. If the cross-sectional area of a magnetic field increases, but the flux remains—
ব্যাখ্যা: We know, B A If area is increases flux density will be decreases because they are inversely proportional to each other.
Moving iron type instrument
Electro-static type instrument
Moving coil type instrument
15. The two pressure coils of a single phase power factor meter have---
The same dimensions and the same number of turns
The same dimension but different number of turns
The same number of turns but different dimensions
16. The absolute measurement of resistance is done by-
17. No eddy current and hysteresis losses occur in-
Electrostatic instruments
Electrodynamo meter instruments
18. In a portable instrument, the controlling torque is provided by--
19. In a moving iron meter, the deflecting torque is proportional to--
Square of the current through the coil
Square root of the measurand
20. Wien bridge is useful for measuring-