ট্রান্সমিশন এন্ড ডিস্ট্রিবিউশন অব ইলেক্ট্রিক্যাল পাওয়ার MCQ
21. স্ট্রিট লাইটের লোড ঠিক রাখার জন্য নিচের কোনট ব্যবহার করা দরকার?
ব্যাখ্যা: স্ট্রিট লাইটের লোড ঠিক রাখার জন্য কনস্ট্যান্ট কারেন্ট ট্রান্সফর্মার ব্যবহার করা হয়।
কনস্ট্যান্ট কারেন্ট ট্রান্সফরমার
22. If we increase the length of the transmission line, the charging current-
23. A 3-layer and diameter of each strand is d, then find the total diameter of ACSR conductor.
24. Zero voltage regulation is possible only for-
25. The fact that current density is higher at the surface when compared to centre is known as--
26. Surge impedance loading of a transmission line can be increased by-
increasing its voltage level
addition of lumped inductance in parallel
addition of lumped capacitance in series
27. Transmission lines are transposed to reduce-
28. If skin depth is more, then skin effect is--
29. In transmission lines distribution constants--
inductance and capacitance
inductance and resistance
30. If we increase the spacing between the phase conductors, the line capacitance-
31. Apart from the skin effect the non-a of the current distribution is also caused by--
32. Skin effect depends on-
33. Proximity effect depends on--
distance between the conductors
34. A transmission line has 50km operating at frequency of 500Hz. Find the type of the line.
medium transmission line.
35. Which of the following transmission line is most practically used in load flow analysis?
36. Condition for maximum voltage regulation-
37. Find the number of strands of ACSR conductor for 3-layer transmission line.
38. If the diameter of the conductor is increased-
the inductance is increased
the inductance is decreased
the resistance is increased
no change in inductance and resistance
39. Skin effective is more in case of
40. সিনক্রোনাস মোটরের জন্য কোন কথাটি সঠিক?
লোড পরিবর্তনে এর গতির পরিবর্তন হয়
এটি শুধু লিডিং পাওয়ার ফ্যাক্টরে চলে
এটি নিজে নিজে স্টার্ট নিতে পারে